Store and Post Information
As our products are custom made, we need around five business days to make your order.
This time is after you have paid for the order and approved your proof.
If you delay paying for your order or approving your artwork proof, this will take longer.
Approximate shipping times as shown below:-
If you require your order faster, we can send it with Australia Post "EXPRESS POST."
Express Post is Usually Overnight to Sydney, a day or two to Melbourne, Brisbane, Adelaide & Tasmania
& 2 to 3 days to Darwin, Alice Springs & Perth
To have your order sent by "Express Post", just add the "EXPRESS POST OPTION."
to your order in the shopping cart.
Note: we are outside the "Guaranteed Next Day" postage area. This means that our express post goes to Sydney first. Then one day to most places. Choosing Express post to Sydney is not guaranteed Overnight.
Parcels will be sent by Australia Post.
Free post is offered for orders over $50
An express post option is available if you need your parcel faster.
We recommend express post if you live in SA, WA or QLD.
International Orders: Unfortunately, we only ship to Australia.
There are two recognised methods for applying vinyl, either wet or dry.
Smaller stickers up to 200 to 300mm in size can usually be applied dry with minimal problems.
Larger stickers above 300mm are easier applied using the wet technique.
Mix the application fluid to the water in a spray bottle as per the directions on the bottle.
Remove the backing from the sticker and lightly position it onto the substrate. Firmly squeegee the image down, starting at the centre and working carefully outwards, ensuring constant pressure is applied across the entire design.
Re-squeegee the image to ensure good contact, taking care not to scratch either the image or the substrate.
Large surface areas are best applied using the wet method, as this method helps eliminate air bubbles on larger areas of vinyl. The wet method also allows re-positioning of the image several times if required – a considerable advantage when applying multi-colour logos or other applications requiring precise alignment.
Use a specialist application fluid such as "Vinyl Lube" to ensure you do not re-contaminate the substrate with fats. Soapy water made from a few drops of washing up liquid will work as well but can reduce the bond effect of the adhesive if too much washing up liquid is used.
Dampen the adhesive side of the vinyl with application fluid using a fine spray. Spray the surface of the object that the sticker is to be applied to as well.
Float the sticker onto the surface, gently dabbing the image down to achieve the correct positioning. Firmly squeegee the image from the centre outwards to force any remaining moisture/air from under the image.
After approximately 30-60 minutes, depending on temperature/humidity – Re squeegee the image to ensure good contact, taking care to avoid scratching.
We can add any artwork to your stickers.
Acceptable file types are:- jpg,jpeg,gif,png,eps,ai,pdf,zip,tar,rar,cdr,psd,svg images only. File should not be larger than 50MB in size.
Remember, your artwork also needs to be clear. If you want it to appear clear on your sticker, we need clear artwork. Low resolution, fuzzy artwork creates low-resolution fuzzy stickers.
If your artwork looks blurry and fuzzy on your screen, it is not suitable. Adobe PDF as the best files with text converted to outlines.
If you do not have access to these type of files, a hi-res JPG is acceptable, as long as it is a minimum of 300 DPI in the actual size.
If you are designing your artwork, the minimum line thickness should be 0.2mm, and the minimum font size should be 6 points.
We cannot guarantee exact matches for Pantone colours as we print in CMYK, but we can usually get fairly close.
The sizes shown for our stickers is the maximum printable area. You should make your design approximately 2mm smaller than this size.
If you are still unsure about anything, call us on 1300 864 212, and we will be happy to help.